Data Translation Inc.
Passionate About Measurement

Sound and Vibration: USB DAQ Modules (for Ethernet Versions)

Data Translation offers small modular data acquisition products that directly measure IEPE or voltage inputs with no added signal conditioning required.  These modules are part of Data Translation's Direct-Connect product line.

Model Key Features/
Application
Analog In (IEPE)/
Resolution
Sample Rate (kHz/ch)/
Accuracy/
ENOB (bits)
Noise (dB)
(1kHz,-6dBfs,
fs=52.7kHz)
DAC/
Tachometer
Software Starting Price*
DT9857 High Channel Count 8 or 16/
24-bit
105.6/
±0.02%/
ENOB: 16.1
SINAD: 93.7
THD: -104.4
SFDR: 106.0
2 Dynamic Waveform DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option $3495
DT9837 Medium performance 4SE/
24-bit
52.7/
±0.02%/
ENOB: 16.1
SINAD: 92.9
THD: -101.9
SFDR: 106.7
1 Fixed Waveform DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option $1445
DT9837A Medium performance, Waveform stimulus DAC
4SE/
24-bit
52.7/
±0.02%/
ENOB: 16.1
SINAD: 93.7
THD: -104.4
SFDR: 106.0
1 Dynamic Waveform DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option $1745
DT9837B Fast response,
No DAC,
1 Tach
4SE/
24-bit
105.4/
±0.02%/
ENOB: 16.1
SINAD: 92.5
THD: -100.9
SFDR: 106.3
No DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option $1745
DT9837C Fast response,
Stimulus DAC,
No Tach
4SE/
24-bit
105.4/
±0.02%/
ENOB: 16.1
SINAD: 92.0
THD: -97.1
SFDR: 104.7
1 Dynamic Waveform DAC/
No Tach
QuickDAQ with Advanced FFT Analysis Option $1745
DT9839E Academic w/bundled sensor and VIBpoint Academic Software 4SE/
16-bit
52.7/
± 0.1%/
ENOB: 15.4
SINAD: 88.3
THD: -92.0
SFDR: 99.5
1 Dynamic Waveform DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option (Academic Version) $695
DT9839 Low cost, Good performance 4SE/
16-bit
52.7/
± 0.1%/
ENOB: 15.4
SINAD: 89.7
THD: -97.1
SFDR: 104.7
1 Dynamic Waveform DAC/
1 Tach
QuickDAQ with Advanced FFT Analysis Option $995
DT9847 Best performance, Widest bandwidth 1-3SE/
24-bit
216/
±0.02%/
ENOB: 17.1
SINAD: 95.1
THD: -101.9
SFDR: 106.8
1 or 2 Dynamic Waveform 32-bit DAC/
0 Tach
QuickDAQ with Advanced FFT Analysis Option $1545

Strain- and Bridge-based: USB DAQ Modules

Data Translation offers small modular data acquisition products that directly measure 1/4, 1/2, or full bridge signals with no added signal conditioning required.  These modules are part of Data Translation's Direct-Connect product line.

ModelKey Features/
Application
Analog In/
Resolution
Sample Rate (kHz/ch)/
Accuracy/
ENOB (bits)
Noise (dB)
(1kHz,-6dBfs,
fs=52.7kHz)
TachometerSoftwareStarting Price*
DT9829 Strain,
Full-, Half-,
Quarter-Bridge-Based Measurement
Up to 8DI/
24-bit
960/
±0.05%
QuickDAQ with Advanced FFT Analysis Option $895
DT9838 Strain,
Full-, Half-,
Quarter-Bridge-Based Measurement
4DI/
24-bit
52.7/
±0.02%/
ENOB: 15.5
SINAD: 89.0
THD: -95.4
SFDR: 102.9
1 Tach QuickDAQ with Advanced FFT Analysis Option $1390

Compare noise performance for all modules using QuickDAQ with Advanced FFT Analysis option: Click Here.

*Price valid in US/Canada. Outside US/Canada, click here.

DT9857
High Channel Count Sound and Vibration DAC
  • 8 or 16 IEPE Input Channels
  • 24-bit Delta-Sigma ADC/channel
  • 105.6kHz/ch sample rate
  • 2, 32-bit Waveform DAC @ 216kHz
  • 1 Tachometer
  • OEM or BNC versions
  • Included software and driver
DT9800 Series
DT9837 Series
Portable Sound and Vibration DAQ
  • 24-bit Delta-Sigma ADC/ch
  • IEPE or voltage inputs
  • 4 analog inputs, tachometer
  • Up to 105.4kS/s/ch
  • 24-bit DAC, up to 96kS/s
  • Sync multiple modules for channel expansion
  • OEM, BNC or mini-XLR packaging
  • Powered by USB
  • Included software and drivers
DT9837 Series
DT9839
Low-Cost Portable Sound and Vibration DAQ
  • 16-bit Delta-Sigma ADC with four simultaneous input channels
  • IEPE or voltage inputs
  • 4 analog inputs, tachometer
  • Up to 52.7kS/s/ch
  • Powered by USB
  • Included software and drivers
DT9839
QuickDAQ with Advanced FFT Analysis
Software for Vibration Analysis
  • Discover and select supported devices
  • Configure/Load/Save hardware configurations
  • Acquire data from multiple boards synchronously
  • Perform single channel and two-channel FFT operations
  • Display acquired data and processed data in real-time during acquisition
  • Save data, export to Excel
QuickDAQ with Advanced FFT Analysis
DT9829
Multi-Sensor Measurement
  • Thermocouple, Voltage,  RTD, Strain, Current, Resistance, Thermistor
  • Any sensor on any channel
  • 24-bit Delta-Sigma ADC
  • 960Hz sampling rate
  • 4 isolated DIO
  • ±500V galvanic isolation
  • Included software and driver
DT9800 Series
DT9838
Portable Strain- and Bridge-Based DAQ
  • 24-bit Delta-Sigma ADC/ch
  • Strain- and Bridge-Based or voltage inputs
  • 4 analog inputs, tachometer
  • Up to 52.7kS/s/ch
  • Sync multiple modules for channel expansion
  • OEM or metal enclosure with RJ50 connectors
  • Powered by USB
  • Included software and drivers
DT9838
DT9847 Series
Sound and Vibration DAQ
  • 24-bit Delta-Sigma ADC/ch
  • IEPE or voltage inputs
  • Up to 3 analog inputs
  • Up to 216kS/s/ch
  • 32-bit DAC, up to 216kS/s
  • Sync multiple modules for channel expansion
  • OEM or metal enclosure with BNC connectors
  • USB and externally powered models
  • Included software and drivers
DT9847 Series
VIBpoint-DT9837 Series
Sound and Vibration DAQ Solutions
  • DT9837 Series hardware bundled with VIBpoint Framework application
  • Supports 16 IEPE or voltage inputs and a tachometer that can be triggered simultaneously
VIBpoint Instruments