|
The DT9836 is a family of high speed, high performance USB Data Acquisition Modules that provide simultaneous analog input operation at up to 225 kS/s per channel. Each analog input has its own A/D converter to eliminate phase shift between channels and to allow you to correlate measurements at the exact same instant in time. These modules feature 3 quadrature decoders for measuring absolute and relative position and for detecting rotational speed.
Key Features:
- Simultaneous A/D operation with sampling rates up to 225 kS/s per channel
- All subsystems operate synchronously at 36 MHz.
- 6 or 12 analog inputs, 2 or 4 waveform analog outputs, 16 digital inputs, 16 digital outputs , 2 32-bit counter timers, and 3 quadrature decoders.
- 16-bit deglitched DAC’s run at 500 kS/s per channel for waveform generation.
- True USB 2.0 host interface for transferring data at rates up to 480 Mbits/second.
- 500 V isolation provides low-noise measurements and protects PC.
- Ships with DT-Open Layers device drives, Ready-to- measure applications, Measure Foundry evaluation, and much more.
 |
DT9834-08-4-16-BNC
& DT9834-16-4-16-OEM are available for Instant Delivery (online orders only). |
|
|
 |
 |
| The DT9836 series modules come in two packaging configurations: BNC connection box and OEM Embedded Version. |
| |
 |
| The DT9836 has a sampling rate for each channel of 225 kHz. This means that the Nyquist limit allows signal frequencies up to 112.5 kHz to be adequately measured. The analog input components have a signal bandwidth that isten times the Nyquist limit or in this case, greater than 1.125 MHz to minimize roll-off and phase errors. |
|
