DT9824

The DT9824 USB data acquisition (DAQ) module offers the highest stability and accuracy for measuring analog signals. Every signal input, both analog and digital , is fully isolated from each other. This technology, ISO-Channel™, guarantees that all signals are protected from any environmental or system noise.

The high stability design of these modules offer four distinct advantages:

10ppm accuracy
a temperature coefficient of ±0.05µV/° C
a CMRR of greater than 150dB
1.5 ppm maximum noise

These features deliver data acquisition results that are twenty times better than the normal solution from another system.

These modules are ideally suited for chromatography, seismic, weigh scale, and medical applications where accuracy and stability are imperative. The rugged, compact module is fully powered by USB and can be used as a portable device or mounted in a rack. Included software and drivers are compatible with Windows XP/Vista/7.

Key Features:

VOLTAGE INPUTS

4, simultaneous, 24-bit analog input channels
ISO-Channel technology provides ±500 V galvanic isolation channel-to-channel for all analog input signals and to the host computer ...guarantees noise immunity
Input gains of 1, 8, 16, and 32 with input ranges of ±10V to support the following effective ranges: ±10V, ±1.25V, ±0.625V, ±0.3125V
...allows maximum flexibility for any signal input

ADVANCED SAMPLING MODES

Sampling frequency up to 4800Hz per channel
Continuously paced analog input operations
Software-programmable trigger type (software or external digital trigger) to start analog input operations
Channel Gain list allows measurement of any combination of channels/gains

ISOLATED DIGITAL I/O

8 opto-isolated digital input lines
8 opto-isolated digital output lines; the outputs are solid-state relays that operate from ±30V at currents up to 400mA (peak) AC or DC data stream for correlating analog and digital measurements
Digital I/O galvanically isolated to 250V
Read the digital input port through the analog input

DT9824 Datasheet

Pricing
Documents
Software
Accessories
Applications

Item	Description	Price*
DT9824	High Accuracy, Simultaneous USB Data Acquisition (DAQ) Module, 24-bit, 4800Hz per channel, 4 AI, 16 DIO, ISO-Channel	$ 1695
DT9824-OEM	High Accuracy, Simultaneous USB Data Acquisition (DAQ) Module, 24-bit, 4800Hz per channel, 4 AI, 16 DIO, ISO-Channel, No Enclosure	$ 1395
Accessories
EP333	2-meter shielded cable with two 37-pin connectors that connect an EP356 accessory panel to an STP37 screw terminal panel. (Can be used with -BNC and -OEM versions for DIO and C/T connections).	$ 250
EP379	Dual-Rack Mount Kit	$ 205
EP380	Single-Rack Mount Kit	$ 165
STP37	Screw terminal panel. Allows connections to analog input, digital I/O, counter/timer, and trigger signals from an EP353 or EP356 accessory panel. (Can be used with -BNC and -OEM versions.)	$ 210

*Prices valid for U.S. and Canada only. For international pricing, click here.

View Cart / Checkout
Availability | Return Policy

Datasheet

DT9824 Datasheet

Manuals

DT9824 User's Manual

Specifications

DT9824 Specifications

	quickDAQ A ready-to-measure application for data acquisition. quickDAQ is a high performance .NET based data collection and analysis software application that allows you to acquire analog data, plot it during acquisition, analyze it, and save it to disk for later analysis. » Download Free Trial
	DAQ Adaptor for MATLAB Access the powerful visualization and analysis capabilities of MATLAB® with any Data Translation PCI or USB board or module. Data Translation's DAQ Adapter provides and interface between the MATLAB Data Acquisition (DAQ) subsystem from The MathWorks and Data Translation's DT-Open Layers architecture. » Free Download
	LV-Link Lets you use Data Translation's USB and PCI data acquisition boards with National Instruments' LabVIEW® » Free Download
	Data Acquisition Omni Software Collection of software, drivers, and utilities for Data Translation USB data acquisition modules and PCI data acquisition boards. Includes DT-Open Layers for .NET Class Library, DT-Display control, DT-Open Layers SDK and DTx-EZ. An evaluation version of Measure Foundry and other ready-to-run applications are included. Also includes 32-bit and 64-bit drivers for Windows® 7.
	Measure Foundry® Measure Foundry is an open, powerful application builder for test and measurement systems. Easily and quickly create complex applications without writing code. » Download Free Trial
	DT-Open Layers® for .NET DT-Open Layers for .NET is a simple to use, yet powerful native .NET class library for developing test and measurement applications in Microsoft Visual Studio®. » Free Download

	EP333 2-meter shielded cable with two 37-pin connectors that connect an EP356 accessory panel to an STP37 screw terminal panel. (Can be used with -BNC and -OEM versions.)
	EP379 Dual-Rack mount kit
	EP380 Single-Rack mount kit
	STP37 Screw terminal panel. Allows connections to analog input, digital I/O, counter/timer, tachometer, and trigger signals from an EP353 or EP356 accessory panel. (Can be used with -BNC and -OEM versions.)

Application Notes and White Papers
Benefits of Simultaneous Data Acquisition ISO-Channel White Paper Why ISO-Channel Technology is Your Best Return on Investment