PCI - Data Translation Knowledge Base

List of articles available in "PCI" RSS Feed
Can I sample 16 bits of digital data at a frequency of 10 to 20 kHz with each trigger pulse using the DT301 board? DT3000 - Can't find board, DT3001 Debounce Digital inputs DT351 , DT300 Series DT-VPI & VEE versions, DTVPI 6.0 DT3002 diff Mode w/Testpoint, DT3002 Do the pins on the wide-scsi type connector (68 pins) match with the description of the TB numbers or the J1 numbers listed in the manual? What is the difference between the system accuracy and the clock accuracy? DT3001 isn't recognized by new PC How is the channel-gain list used on the DT3010? Terminal Assignments , DT3010 Which DT data acquisition PCI boards or USB modules support pre, post, and about triggers? Do your PCI boards work in a +5V or +3.3V PCI slot? Do your PCI boards work in a 32-bit or 64-bit slot? Are your PCI boards considered Universal PCI boards? Why do I get an error when I try to count events using the counter/timers of a DT300 Series board? Changing Board's Name, DT322 Which PCI board series does the DT335 belong to? Updated pc - intermittant crash, DT3010 Does DT PCI boards support PC104, PCI-X or 3.3 Volt PCI slots?" What is the line-to-line and line-to-ground capacitance of the EP305 cable? Can the DT300 Series boards output continuous waveforms from the DACs? Digital I/O Rate, DT335 What cable do I need to interface to the DT300 Series? Fan-Out Circuit for Clocks, DT340 How do I access the digital I/O ports of the DT300 Series using DT VPI? What are the part numbers for the cable connecting to the DT3010? DIO subsystem configuration, DT335 What are the cable specifications for connecting to the DT3000 Series boards? How does one distinguish an interrupt generated by a DIO versus an interrupt generated by the counter timer when using the DT340? Set Channel Gain, in TestPoint, TestPoint Current draw from the +/- 15v, DT3010 Why am I observing signal aliasing problems with the DT3010? The 50 Hz on the power line (including the noise) modulates itself with a clean high-frequency input signal (ie. 1 kHz or more) from channe How many DT300 Series boards can I use in the same computer? What Noise Reduction is used?, DT3016 What is the time between the start of A/D conversion and the dynamic digital outputs on the DT3010? Can I generate a waveform output with the DT3010/32 without using CPU time? How do the analog outputs work on the DT300 Series? DT322, Simulaneous channels Why does the board measure only 3.5/3.6 V when we connected 5 V (verified with an oscilloscope) to analog input channel 0? Is it possible to read digital and analog inputs in the same scan list for the DT3001? Clock Source for Counting, DT340 Additional resistance spec's , DT340 Digital outputs, DT302 Interrupt from Counter Timer, DT3001 "Can I use continuous digital input through the AD channel list even if one port is used as an output on the DT3010? "What is the part number for the connector on the DT747? Is the sampling rate for the DT300 Series specified per board or per channel, and is it the same whether we work in differential mode or single-ended mode? What are the rates of the DACs on the DT3010/32? When using externally retrigger scan mode with an about-trigger on the DT301, every time the post-trigger occurs it seems that the buffers are filled in a different way. For example,the channel list c 24 bit DIO limitation, DT330 Series Max current from Analog Output, DT300 Series Maximum volts of Digital lines, DT300 Series DT321, External clock DT321, Programmable gain DT321, Digital outputs DT302, Configuring SE/DI channels properly DT322, External trigger DT321, Continuous streaming Rate of C/Ts, DT300 Series DT300 Series, Analog outputs DT300 Series, Digital I/O and VEE, No CD-ROM error while installing DT2821 DT340 used with Testpoint DT300 Series, Triggering and buffers Reading DIO bits, DT300 Series Using multiple DT300 Series boards DT300 Series, Isolation Notification procedure, DT300 Series DT300 Series, Stopping AD, after x samples DT300 Series pin numbers Event counting, DT300 Series Digital Input/Output capabilities DT321 with 5B module DT300 Series connections Triggered scan mode, DT300 Series DT321, Pseudo-differential mode Simultaneous sampling, DT300 Series DT321, 5B power supply Intial configuration of digital I/O Does the Intel Atom processor support the Data Translation PCI cards? Can I use Delphi with the DT3010?
Subcategories available under "PCI"
There are no subcategories available.